Publications

Journal


[1] Branco, D., C., Ganju, E., An, L., Chawla, N., and Cheng, G., "Elucidating the Role of Pulse Shaping on Defects Formation in High-Purity Aluminum Fabricated by Powder Bed Fusion" Additive Manufacturing (2024). in press.


[2] Ganju, E., Chawla, K., Yang, S., and Chawla, N., "Time-resolved roasting-induced microstructural evolution of Arabica coffee beans from Brazil, Colombia, and Ethiopia captured using x-ray computed micro-tomography" Journal of Food Engineering, 361-111733 (2024) [Link].


[3] Nieto, E., Ganju, E., Llorca, J, and Chawla, N., "Assessment of slip transfer criteria for prismatic-to-prismatic slip in pure Ti from 3D grain boundary data" Acta Materialia, (2023) [Link]


[4]     Ganju, E., Nieto, E., Llorca, J, and Chawla, N., "A Novel Diffraction Contrast Tomography (DCT) acquisition strategy for capturing the 3D crystallographic structure of pure Titanium" Tomography of Materials and Structures 01, no. 10003 (2023) [Link].


[5] Huang, T., Ganju, E., Torbatisarraf, H., Thompson, M., Chawla, N., "Advanced microstructural and compositional analysis of a Lunar Agglutinate from the Apollo 11 Mission" Meteoritics & Planetary Science. submitted.


[6] Torbatisarraf, H., Sinclair, D., Ganju, E., Torbatisarraf, S. A., Niverty, S., Sundar, A., and Chawla, N. "Influence of contouring on the microstructure and micromechanical properties of Laser Powder Bed Fusion (LPBF) processed Al6061 enhanced with reactive particles" Additive Manufacturing, in preparation." Additive Manufacturing, submitted.


[7] Ganju, E., Kilic, M., Parab, N., Prezzi, M., and Salgado, S., "Effect of particle strength and morphology on the evolution of particle size and fabric of sands loaded under uniaxial compression." Acta Geotechnica, no. 16 (2021): 3489–3516 [Link]


[8] Ganju, E., Galvis-Castro, A. C., Hashem, F., Prezzi, M., and Salgado, S., "Displacements, strains and shear bands in deep and shallow penetration processes." Journal of Geotechnical and Geoenvironmental Engineering, 147, no. 11 (2021):  04021135 [Link] – Nominated for American Society of Civil Engineers’ Norman Medal


[9] Ganju, E., Han, F., Prezzi, M., Salgado, R., "Closure to "Static capacity of closed-ended pipe pile driven in gravelly sand." by Eshan Ganju, Fei Han, Monica Prezzi, and Rodrigo Salgado."  Journal of Geotechnical and Geoenvironmental Engineering, 147, no.8 (2021): 07021015 [Link]


[10]  Ganju, E., Han, F., Prezzi, M., and Salgado, R., "Static capacity of closed-ended pipe pile driven in gravelly sand." Journal of Geotechnical and Geoenvironmental Engineering 146, no. 4 (2020): 04020008 [Link]


[11]  Ganju, E., Han, F., Prezzi, M., Salgado, R., and Pereira, J. S., "Quantification of particle crushing around a penetrometer tip." Geoscience Frontiers 11, no. 2, (2020): 389-399 [Link]


[12]  Han, F., Ganju, E., Prezzi, M., Salgado, R., and Zaheer, M., "Axial resistance of open-ended pipe pile driven in gravelly sand." Géotechnique 70, no. 2 (2020): 138-152 [Link]


[13]  Han, F., Ganju, E., Prezzi, M. and Salgado, R., "Comparison of the load response of closed-ended and open-ended pipe piles driven in gravelly sand." Acta Geotechnica 14, no. 6 (2019): 1785-1803 [Link]


[14]  Han, F., Ganju, E., Salgado, M., and Salgado, R., "Closure to “Effects of interface roughness, particle geometry, and gradation on the sand–steel interface friction angle” by Fei Han, Eshan Ganju, Rodrigo Salgado, and Monica Prezzi." Journal of Geotechnical and Geoenvironmental Engineering 145, no.11 (2019): 07019017 [Link]


[15]  Kim, H., Tang, D., Ganju, E., Prezzi, M., and Salgado, R., "Experimental investigation of matric suction in compacted fine-grained soils." International Journal of Pavement Engineering 20, no. 1 (2019): 53-60 [Link]


[16]  Salgado, R., Ganju, E., and Prezzi, M., "Site variability analysis using cone penetration test data." Computers and Geotechnics 105, (2019): 37–50 [Link]


[17]  Han, F., Ganju, E., Prezzi, M. and Salgado, R., "Effects of interface roughness, particle geometry and gradation on the sand-steel interface friction angle." Journal of Geotechnical and Geoenvironmental Engineering 144, no. 12 (2018): 04018096 [Link]


[18]  Ganju, E., Kim, H., Prezzi, M., Salgado, R. and Siddiki, N. Z., "Quality assurance and quality control of subgrade compaction using the dynamic cone penetrometer." International Journal of Pavement Engineering 19, no. 11 (2018): 966-975 [Link]


[19]  Tang, D., Ganju, E., Rahman, S., Li, D., Prezzi, M. and Salgado, R., "On modelling the compressibility of unsaturated fine-grained soils." Soils and Foundations 57, no. 5 (2017): 892–97 [Link]


[20]  Ganju, E., Prezzi, M. and Salgado, R., "Algorithm for generation of stratigraphic profiles using cone penetration test data." Computers and Geotechnics 90, (2017): 73–84 [Link]


[21]  Kim, H., Ganju, E., Tang, D., Prezzi, M., and Salgado, R., "Matric suction measurements of compacted subgrade soils." Road Materials and Pavement Design 16, no. 2 (2015): 358-378 [Link]

Conference


[1] Ganju, E., Nieto, E., Llorca, J., and Chawla, N., "Enhancing the reliability of reconstruction for small grains using novel Laboratory Diffraction Contrast Tomography (Lab DCT) acquisition and reconstruction approaches" TMS Annual Meeting & Exhibition, March 19–23, 2023, San Diego, California.


[2] Huang, T., Ganju, E., Torbatisarraf, H., Niverty, S., and Chawla, N., "Deformation Behavior of Chondrite Meteorite using in situ Correlative Microscopy" TMS Annual Meeting & Exhibition, March 19–23, 2023, San Diego, California.


[3] Nieto, E., Ganju, E., Chawla, N., and Llorca, J., " Slip transfer at grain boundaries and intergranular fracture in Ti." TMS Annual Meeting & Exhibition, March 19–23, 2023, San Diego, California.


[4] Torbatisarraf, H., Niverty, S., Singaravelu, A., Ganju, E., and Chawla, N., "Correlative Microscopy and Microstructural Characterization of Porosity Induced by Contouring in a Selective Laser Melted AA6061 Alloy:" 3DMS, June 26–29, 2022, Washington, D.C.


[5] Ganju, E., Torbatisarraf, H., Roy, S., Laha, T., Oza, M., Schell, G., Bucharsky, E. C., and Chawla, N.," X-ray Microscopy Analysis of Functionally Graded SiC Particle Reinforced Aluminum Matrix Composites Using Dual-energy Tomography." 3DMS, June 26–29, 2022, Washington, D.C.


[6] Ganju, E., Nieto, E., Llorca, J., and Chawla, N., "Helical Phyllotaxis and Conventional Laboratory Diffraction Contrast Tomography (LabDCT) Acquisition Strategies for Characterization of 3D Grain Orientations." 3DMS, June 26–29, 2022, Washington, D.C.


[7] Ganju, E., Han, F., Prezzi, M., Salgado, R., "The axial capacity of closed-ended pipe piles driven in gravelly sands."  IFCEE 2021. International Foundations Congress and Equipment Expo 2021, May 10–14, 2021, Dallas, Texas.


[8] Ganju, E., Galvis-Castro, A. C., Han, F., Prezzi, M., Salgado, R., "Experimental study of crushing in cone penetration tests in silica sands." GeoCongress (2020). Minneapolis, Minnesota (USA).


[9] Han, F., Ganju, E., Prezzi, M., Salgado, R., "Static load test on open-ended pipe pile using double-wall instrumentation." GeoCongress (2020). Minneapolis, Minnesota (USA).


[10]  Galvis-Castro, A. C., Ganju, E., Tovar-Valencia, R., Prezzi, M., Salgado, R., "Effect of installation method on the ratio of tensile to compressive shaft capacity of piles in dense sand." 44th Annual Conference on Deep Foundations (2020). Chicago, Illinois (USA).


[11]  Ganju, E., Salgado, R. and Prezzi, M., "Site variability characterization using cone penetration test data." Eighth International Conference on Case Histories in Geotechnical Engineering (2019). Philadelphia, Pennsylvania (USA).


[12]  John, A. D., Gairola, A., Ganju, E., Gupta, E., "Design wind loads on reinforced concrete chimney–an experimental case study." The Twelfth East Asia-Pacific Conference on Structural Engineering and Construction (2011). Hong Kong (China).


[13] Ganju, E., Han, F., Prezzi, M., Salgado, R., "The axial capacity of closed-ended pipe piles driven in gravelly sands."  IFCEE 2021. Proceedings of International Foundations Congress and Equipment Expo 2021, May 10–14, 2021, Dallas, Texas.


[14] Ganju, E., Galvis-Castro, A. C., Han, F., Prezzi, M., Salgado, R., "Experimental study of crushing in cone penetration tests in silica sands." Proceedings of GeoCongress (2020). Minneapolis, Minnesota (USA).


[15] Han, F., Ganju, E., Prezzi, M., Salgado, R., "Static load test on open-ended pipe pile using double-wall instrumentation." Proceedings of GeoCongress (2020). Minneapolis, Minnesota (USA).


[16] Galvis-Castro, A. C., Ganju, E., Tovar-Valencia, R., Prezzi, M., Salgado, R., "Effect of installation method on the ratio of tensile to compressive shaft capacity of piles in dense sand." Proceedings of 44th Annual Conference on Deep Foundations (2020). Chicago, Illinois (USA).


[17] Ganju, E., Salgado, R. and Prezzi, M., "Site variability characterization using cone penetration test data." Proceedings of Eighth International Conference on Case Histories in Geotechnical Engineering (2019). Philadelphia, Pennsylvania (USA).


[18] John, A. D., Gairola, A., Ganju, E., Gupta, E., "Design wind loads on reinforced concrete chimney–an experimental case study." Proceedings of the Twelfth East Asia-Pacific Conference on Structural Engineering and Construction (2011). Hong Kong (China).